3D Import

• Patch #7080: Module is recognised as very small

CSV-Import

• Patch #6952: Error message in csv import

Data Format

• Patch #6880: New template NCMs for SBZ6xx
• Patch #7065: String escaping in ECW

Installer & WebUpdate

• Defect #6932: Installer does not work
• Patch #6896: Check whether Windows 11 has problems with the web updater

Probing

• Feature #5093: Z correction Free defined plane does not work

Setup-Sheet & Reporting

• Defect #7117: Error in new set-up blade (sawing orientation)
• Defect #7186: Error in image generator
• Patch #5721: Support fixture parameters in set-up sheet

Special functions

• Defect #6997: Work row in group and converting this group to work row does not work in current test version
• Defect #7063: Pre-drilling from front / rear does not work if WKZ is only possible from top
• Patch #6867: Job variables are not imported after clamp editing

Time Study

• Patch #6907: Support time study html file with atlernate name

UI (Work Table)

• Patch #7010: Use WPreComment / WPostComment from external macro

User Interface

• Defect #6855: Insert sawing in group and then into row deletes the sawing
• Defect #7073: ToolTip for BBarCode not working
• Patch #6859: Move drop side to details
• Patch #6864: Tact mode 2 no longer available
• Patch #7019: Hide warnings for missing profiles
• Patch #7039: No rounding of base profile
• Patch #7067: No rounding for user strings, barcodes and labels

Works & Free Sides

• Feature #7060: Machining type Screw

CSV-Import

• Feature #6846: Prune job tree
• Feature #6847: Prune document as CSV Import option

Commandline

• Feature #6728: Pre-NC run options via command line

Data Format

• Patch #6748: Allow negative depth table values
• Patch #6852: Keep blank lines in CLabel

Installer & WebUpdate

• Defect #6663: Continue install or abort?
• Defect #6712: Installer stuck after restart
• Defect #6768: CodeMeter v8.0 is not recognized
• Defect #6793: eluCad Updater not localized
• Defect #6878: Current installer installed in x86 path

Settings

• Defect #6850: Copy of target machine does not copy machine-specific values
• Defect #6854: Deletion of target machines does not remove machine-specific settings values

User Interface

• Defect #4940: Notches in groups
• Defect #6792: Missing localization for document's Close Tab button
• Defect #6848: Merge ECWs marks them as unmodified
• Patch #5855: Machine stop expression support
• Patch #6775: Warning about already existing free side
• Patch #6845: Warning N326 navigation

Works & Free Sides

• Patch #6683: Side change for single-side macros

Coordinate System

• Defect #6556: Depth table calculation error for EluCam coordinate system

Data Format

• Defect #6694: Depth written in scientific notation

Macros

• Defect #6589: If the macro database is empty, an error occurs when saving the first macro

NCX-Run, AV, PPs

• Patch #6673: Expressions in machine macro variables must be evaluated to numeric values before writing NCW
• Patch #6767: SBZ 151 PP

Notching

• Defect #6560: Default notching method being automatic fails

Setup-Sheet & Reporting

• Defect #6669: Missing texts in setup sheet

Special functions

• Defect #6666: Sort order tree by NC run generates program from unsorted order

Tool Database

• Defect #6625: Old tool update retrieves all tools
• Defect #6668: Tool database fails to process variable databsase paths
• Patch #4885: Automatic rotation allowed for 0-7
• Patch #6634: SBZ 155 without new tool update
• Patch #6677: Allow file-based tool exchange through new interface

User Interface

• Defect #6653: Folder paths with special characters may not open via View > Directories

Variables

• Patch #6620: Variable MType redirected to settings value, MBaseType points to base value

3D Postprocessing

• Defect #6353: Crash of EluCad when generating a free form

3D View

• Defect #5217: Display of a free form incorrect
• Defect #5908: 3D mouse no longer works
• Feature #4152: Show profile bounding box
• Feature #6315: Support for z offsert in clamp visualization

Clamping

• Defect #6335: Wrong numbering in clamp situation
• Defect #6493: Application crash after clamp editing
• Patch #6422: Only discard CCutStart when changing part length after confirmation

Commandline

• Patch #6347: Background execution of eluCad keeps running in Windows 11

DXF & DWG Import/Export

• Defect #6442: Cannot import DXFs with regions
• Patch #6450: DXF support for old HMI versions

Data Format

• Defect #6268: Error reading ECW/NCW/NCT files with comments

Databases

• Defect #6488: Imported profiles are stored inaccurately
• Defect #6504: Sorting database files doesn't work

Installer & WebUpdate

• Patch #6319: Removed target machine setup step
• Patch #6378: Missing license during installer

Localization

• Defect #6382: Error in Spanish localization

Macros

• Defect #6296: Macros with free defined planes move when copied and pasted into a new job
• Defect #6517: Replace macro prompt error

NCX-Run, AV, PPs

• Defect #6494: Assign part ID action breaks orientation change
• Feature #6322: Experimental geometric clamp positioning
• Feature #6498: Missing macro check
• Patch #6308: Moving eluXML and NCX2NCW postprocessors

Probing

• Defect #6365: eluCad selects wrong approach point for measure point within bounding box
• Defect #6499: Measure assignment for signature lost on clamp editing
• Feature #6403: Calculate axis compatibility for center point measure groups

Settings

• Defect #6412: Sorted list settings are not enabled/disabled according to the setting scope
• Feature #6328: Button to create another target machine
• Patch #6348: Experimental runtime improvement in the settings dialog
• Patch #6476: Enforce Code39 for barcodes

Setup-Sheet & Reporting

• Defect #6271: Empty value read as empty expression from ECW

Special functions

• Defect #6542: Priority for PreDrill reordering always takes effect
• Patch #6357: Hide clocking mode 2

Tool Database

• Defect #6373: Tool usage formula lost due to write error
• Defect #6407: Old tool exchange ends eluCad
• Feature #6426: ECI tool exchange for tools with and without assigned place
• Feature #6534: Advanced cooling modes

User Interface

• Patch #6318: Prompt for users without configured target machines

eluCloud

• Feature #6475: Barcode CODE39 for eluCloud Upload
• Patch #6458: Part only has works if they're active
• Patch #6463: eluCloud Upload during NC run only for successful run

3D Import

• Defect #6134: Slow 3D import
• Defect #6163: Notching not recognized

CSV-Import

• Defect #6157: Wrong coordinate system after CSV import

Core

• Patch #6203: Potential support for non-UTF-8

Data Format

• Defect #6148: Cutting angle formulas not used
• Defect #6159: Cut post intrusion not read from ECW files
• Patch #6173: NCW format depends on NC-X version
• Patch #6212: Backwards compatibility for wrong NCWs

Databases

• Defect #6265: When duplicating a profile the configured unit system is being ignored
• Feature #6086: SBZ6xx offset conversion

Free Millings (Editor)

• Defect #6066: Navigation in angle and radius changes contour

Localization

• Patch #6207: Changed language suffixes

Macros

• Defect #6229: Write protection for macros is ignored

NCX-Run, AV, PPs

• Defect #6179: Application crash when closing NC log window
• Defect #6187: Navigation via error list doesn't work

Settings

• Feature #6154: New ID for SBZ6XX

Tool Database

• Defect #6217: TMaxCut not supported for Drills and Flowdrills

User Interface

• Defect #6139: Variable window disappears by opening and closing via menu selection
• Defect #6243: Expanding a sawing while editing the notch angle

Variables

• Defect #6238: Default job variables' comments not read

eluCloud

• Patch #6200: Upload user ident as metadata

3D Import

• Defect #5970: 3D import detects machining incorrectly or not at all
• Defect #5977: Profile bounding box error message
• Feature #5912: Support file associations for additional file formats
• Feature #6114: Canceling the entire import process for assemblies
• Patch #5590: Profile matched only 85%

3D View

• Defect #5910: Move symbol during postprocessing
• Defect #5914: Rendering of chop angles
• Feature #5135: Move clamp by double click

Bar Optimiser

• Feature #6060: Part sorting setting

CSV-Import

• Defect #5919: CSV import does not close opened files
• Defect #6103: Crash during CSV Import
• Patch #5916: Setting "Abort on Error" in CSV Import
• Patch #5918: Set csv import log window closeable instead of closing it

Clamping

• Defect #6031: Crash during NCW file load

Code CleanUp

• Defect #5909: Dot in job name prevents full name of machine file

DGX

• Feature #5942: DGX2 Output of CBarcode

Data Format

• Defect #6022: Invalid expression
• Defect #6044: Error reading clamp situations from ECW
• Defect #6046: After resetting the clamps, an error message appears and the file is corrupted
• Defect #6070: ECW with set clamps open again delete clamps
• Defect #6102: Macro saving crash
• Defect #6146: Wrong bar length reading documents in inches
• Feature #6050: ECW Checksum
• Patch #6043: Always sort work order by clamp situation order
• Patch #6098: Reading incomplete deth tables from NCW
• Patch #6100: UTF-8 detection without BOM

Databases

• Defect #6087: Application crash loading macros on free planes

Format Import

• Defect #6024: Error reading ECW

Formulas & Variables

• Defect #6081: Variables are not transferred

Free Millings (Editor)

• Defect #4761: Subsequent change of the interpolation not possible
• Defect #4792: Push-through of millings ignores ISO type of curvature
• Defect #5347: Radio input ignored
• Defect #5628: New freeform editor: programmed steps cannot be modified
• Defect #5836: Tab-Button don´t work
• Defect #5903: Automatic zoom during scene reset
• Defect #5967: Fix operations and assistant dialogs
• Defect #5987: Line selection
• Defect #5988: Setting start point for existing mill path
• Defect #5989: Last point in free milling cannot be deleted
• Defect #5990: Dialog interactions unintentionally change mill path
• Defect #5992: Angle input not working
• Patch #5972: Message: Arc greater than 180° is incorrect
• Patch #6000: Warning before replacing an existing mill path

Localization

• Feature #5961: Migration of translation texts

Macros

• Defect #6109: Issue reading macros with multiple free planes

NCX-Run, AV, PPs

• Defect #5913: Error in reading/writing of cut generation stop fields
• Defect #6010: Issues reading NCW files
• Defect #6121: Work selection via error log
• Feature #5994: NCW Reading / Writing

Probing

• Defect #5924: Error in writing measure runs to NCW
• Defect #6128: Measure groups read incorrectly
• Defect #6130: eluCad crash during center point measurement

Settings

• Feature #3344: Suppress macro priority change warning
• Feature #5955: DGX format selection is mistakenly machine-specific

Setup-Sheet & Reporting

• Feature #6095: Use security distance with active post intrusion for excel export
• Patch #6014: Setup sheet being generated during clamp editing
• Patch #6094: Diameters of inactive works are irrelevant for excel export

Special functions

• Defect #5971: Retract opening enabled if z correction is enabled

Tool Database

• Defect #6069: Tools added via tool exchange activates break control
• Feature #5995: NCT Reading / Writing
• Patch #6026: Only write valid UKind types to tool database files

UI (Work Table)

• Defect #6028: Crash during work insertion

User Interface

• Defect #5939: Numeric CBarcode gets handled as floating-point number
• Defect #6013: eluCad crash when closing document during rotation change
• Defect #6053: eluCad does not close while profile or macro database dialogs are open
• Defect #6091: Application crash closing NC-X progress dialog
• Defect #6131: DXF Export from profile datbase mixes directory and file path

Variables

• Defect #6016: Application crash when copying cuts

Works & Free Sides

• Defect #6012: Sorting parts by length drops free sides
• Defect #6015: Crash before NC run for an empty workrow
• Defect #6068: Signature millings are counted incorrectly during ECW reading

3D Import

• Defect #5683: Rectangles are detected incorrectly
• Defect #5701: Internal copies count in 3decw overridden by imported file count
• Defect #5703: Machining is not recognized

3D View

• Defect #5363: Display error of a macro

3D-Assistent

• Patch #5722: Number input during rotation

Bar Optimiser

• Feature #5872: Default values for bars in STO2

CSV-Import

• Feature #5874: CSV Multi-Import

Commandline

• Feature #5901: Support for ErrorLevel in command line operations
• Patch #5873: Binary command line suboptions are incorrectly parsed

Core

• Defect #5887: Crash during clamp repositioning

DXF & DWG Import/Export

• Defect #5413: DXF is displayed in yellow / sawing
• Defect #5714: Fixture DXF Import doesn't work

Data Format

• Defect #5697: Saw cut tool id lost through plugins
• Feature #4628: Sending bar count to machine
• Feature #5785: New ncm&ncc templates for SBZ6XX
• Patch #5778: Removed check for special characters when editing clamps
• Patch #5850: WMType not welcome in NCW

Databases

• Defect #5820: Clean up DB deletes used macros

Formulas & Variables

• Feature #4018: Ability to lock comment column in job variables table

Free Millings (Editor)

• Defect #5587: New / Delete buttons
• Defect #5886: Editor starts in the background (Testversion)

Installer & WebUpdate

• Defect #5746: Autosave backup folder not created
• Defect #5885: Filenames with spaces
• Patch #5803: Selection of work direction for SBZ6XX machines
• Patch #5818: Updated machine images

Localization

• Patch #5710: Additional language files

NCX-Run, AV, PPs

• Patch #5688: Handling of empty suffix for post processors

Notching

• Defect #5686: Notch variant is expanded too large
• Defect #5689: Not all notch variants are calculated correctly in INCH
• Feature #4921: AKM notch at the top / bottom or front / back from one side

Settings

• Patch #5799: Add new SBZ118 Eckelmann

Setup-Sheet & Reporting

• Defect #5733: Setup sheet not correct
• Defect #5742: Crash during setup sheet creation

Time Study

• Defect #5220: TimeStudy aborts with message
• Feature #5168: Error after Time Study

Tool Database

• Defect #5894: Intrusion length not saved for measure tools

User Interface

• Defect #5755: F2 key not working anymore

Works & Free Sides

• Defect #4311: Macro/group rotatable only as multi side macro with respect to free defined plane

eluCloud

• Defect #5759: eluCloud upload no longer works
• Feature #5878: Only upload actual parts to cloud

3D Import

• Defect #5510: Drills are not detected
• Defect #5528: Difference between 3D Import Assistant and 3D Import results
• Defect #5532: Rectangle detection issue
• Defect #5622: Overlang sawing
• Defect #5633: Error in plane optimization
• Defect #5673: Cross section geometry size and free side plane optimization with inches
• Defect #5682: Issue with 3d import via command line in imperial units
• Feature #1751: Optimization of free sides with identical orientation
• Feature #4095: Recognising saw cuts with notch angle as processing type Notch
• Patch #5533: Inaccurate profile cross-section leads to pointless works

3D Postprocessing

• Defect #382: Unrecognized works during 3d post processing
• Defect #5445: Error during postprocessing with the 3 key
• Defect #5624: Sawing at wrong position after 3D postprocessing

3D View

• Defect #4959: Display deburr in 3D view incorrect
• Defect #5530: Highlighting of clamps not working
• Defect #5534: Differences in bar view
• Defect #5601: Inverted sawing path drawn incorrectly

3D-Assistent

• Defect #5600: Unit symbols in slant/slew fields after import
• Defect #5670: Unit system incorrectly communicated to 3d import assistant

Bar Optimiser

• Defect #5583: Cutting loss of 5mm becomes 5 inches

C#

• Feature #5652: Error and log file handling

CAD Editor

• Defect #5598: Missing image for key cylinder creation wizard
• Defect #5607: Create default profile - graphic incorrect

CSV-Import

• Defect #3376: Problems with backslash when parsing command line parameters
• Patch #5560: ECW file support for CSV Import updated

Data Format

• Defect #5559: Multibyte locale support (e.g. Japanese)
• Defect #5573: Automatic tool is incorrectly written to ECW file
• Defect #5694: After edit clamping the ecw can´t be open
• Defect #5699: File name for macro databases incorrectly written to ECW
• Feature #5484: UTF-8 file support
• Patch #5099: File differences between NCW Export and NC Run

Databases

• Defect #5620: Profiles missing from database view in Windows 11
• Defect #5696: Unit of measurement no longer fits after assigning fixtures

Format Import

• Feature #5105: DGX - CNo of the DGX should be used

Free Millings (Editor)

• Defect #4798: Chamfer or radius is set incorrectly
• Defect #4799: Scale does not work
• Defect #5591: New freeform editor closes without message on finished macros
• Defect #5626: Error in contour generation
• Defect #5627: New milling without side assigned
• Defect #5629: New freeform editor: message for circular arc incomplete
• Defect #5630: Modification of free millings via ISO Code
• Defect #5631: Error in Update from G-Code button
• Defect #5643: Free millings modified without user action
• Defect #5655: Diameter parameter is ignored
• Defect #5656: Button for measurements doesn't work
• Defect #5657: Unit compatible feed input
• Defect #5659: Delete button not functional
• Defect #5664: Chamfer blocks translation to origin
• Defect #5666: Comma input must be changed to decimal point
• Defect #5667: Application crash for radius input
• Defect #5668: Default diameter does not respect unit system

Job-Tree

• Defect #5526: Bars with duplicate profiles in document may lose length value

Localization

• Defect #5574: Duplicate translated text for clamp situation export in setup sheets
• Defect #5674: Localized error messages when expanding a notch

NCX-Run, AV, PPs

• Defect #5646: NCW file format detection when clamp editing
• Defect #5651: Wrong error numbers from NC-X
• Feature #3593: Automatic discovery of NCO files
• Feature #5485: NCW Files in UTF-8
• Patch #4560: Error message is not understandable

Notching

• Defect #5576: Notch variant issue
• Defect #5669: Expanded notches are calculated in the wrong unit system
• Patch #5490: Notification when missing tools during notch expansion

Pocket Milling & Cleaning

• Defect #4370: Default button in milling broach dialog
• Defect #5672: Island pocket milling doesn't work in inches

Settings

• Defect #3908: Scope of a setting can not be changed if currently configured path does not exist
• Defect #5578: Path of the .ncc file is not saved
• Defect #5671: 3D Import settings incorrectly apply unit system factor
• Feature #90: eluSettings - resolving relative paths
• Feature #4565: Default Anglehead Width for setup sheet clamp areas
• Feature #5475: Introduce safety distance between mount and profile
• Patch #4824: Open contour warning for FERRO control machines
• Patch #5489: Prevent manual input for notch methods

Setup-Sheet & Reporting

• Defect #3327: Setup sheet button disappeared
• Defect #4564: Clamp Areas missing in setup sheet
• Defect #5579: Export of clamp situations
• Feature #5653: Cut number length in excel export file name
• Feature #5654: Job specific subfolders for Excel export
• Patch #5479: Added cut section and cut loss to default template
• Patch #5508: Units in setup sheet
• Patch #5612: Setup Sheet blocks templates without cut images

Special functions

• Defect #5593: Application crash during excel export
• Feature #5273: Custom solution for excel export
• Patch #3867: Backup copy cannot be opened

Testrun

• Feature #5245: Specify precheck output path

Tool Database

• Defect #4125: Create a user-defined tool in the tool database via "Extras"
• Defect #5575: "Invalid tool preset by user" message not correct
• Defect #5577: Selected side for the tool is not taken over
• Defect #5597: Tool exchange skipped during nc-x run
• Defect #5644: Tool Usage Type written incorrectly
• Defect #5648: Tool parameters exported incorrectly
• Feature #5486: NCT Files in UTF-8
• Patch #5260: Ignore angular head rotation values for ECI tool exchange

UI (Work Table)

• Defect #5563: Percentages in depth table initialized with 0
• Defect #5582: Set filter on works does not persist
• Feature #31: Macro variable comments
• Feature #1529: allowed more than 3 decimal places in Feed / speed
• Feature #2165: Height correction for bar programs via bar options

User Interface

• Defect #2299: Work table ignores letters outisde A-Z range
• Defect #5483: Cut orientation can get reset during clamp edit
• Defect #5499: Comment field for groups/macros jumpy
• Defect #5572: Changing the debur tool is not considered a document modification
• Defect #5675: Notch variant dropdown is not committed when pressing Expand Notches button
• Defect #5684: Application crash during Assign Bar Id when no document is currently open
• Feature #3650: Open profile database by double-clicking in job tree view
• Feature #5451: Control WPreComment & WPostComment via eluCad
• Feature #5569: Make macro variable table interactively scaled
• Feature #5616: Provide links to both changelog and release notes via eluCad help menu
• Feature #5687: Test version points to test version changelog
• Patch #1825: Show CBarcode / CLabels as editable properties
• Patch #3384: Accept selection in macro db dialog with Enter key
• Patch #4965: Measure group icons replaced
• Patch #5480: 3D view dock title doesn't reset when document is closed

Works & Free Sides

• Defect #5191: Deburr with unintentional post intrusion
• Defect #5602: Group/Macro name can't be removed
• Defect #5661: Signature generation error

eluCloud

• Defect #5650: eluCloud Status Window not showing

3D Import

• Feature #5350: Setting for drill point angle during countersink detection
• Patch #5340: Edits are detected twice

3D-Assistent

• Defect #5162: Assembly is not recognized
• Defect #5187: 3D-import assistent / eluCad crash

Bar Optimiser

• Feature #5278: Improvement of STO2 results
• Patch #5329: Log output for STO should list statistics by color
• Patch #5331: Remove code entry for STO2

Code CleanUp

• Defect #5388: Whitespace issue for optional feature codes

Free Millings (Editor)

• Defect #5323: Freeform editor cannot be opened

Installer & WebUpdate

• Patch #4731: Integrate VC++ redistributables into installer/updater
• Patch #4879: Change layout from installer

Notching

• Defect #5435: Missing safety distance after notch expand

Setup-Sheet & Reporting

• Defect #5181: Template from Setup-sheet does not work
• Defect #5315: Setup sheet does not work

Tool Database

• Patch #5236: Zeroable types in Elumatec tool adjustment

User Interface

• Defect #3722: eluCad crashes when moving machining operations between clamping situations
• Defect #5390: Mirror Cut in X misaligns millings in ELU coordinate system

Variables

• Defect #5356: Variable W4 not possible for free defined planes
• Defect #5371: The internal variable h is not available

3D Import

• Defect #5182: Cuts missing after assembly import
• Defect #5219: Free form from behind is not detected
• Defect #5249: Assembly import double-converts into inches
• Defect #5251: Works slightly misplaced
• Defect #5255: Wrong profile length
• Defect #5308: Forcing works from Top didn't work any more
• Patch #5327: 3D model is incompletely recognized
• Patch #5328: Works misplaced

3D Model

• Defect #5204: Freeform is not recognised from back

3D View

• Defect #5289: View error for burring without safety distance

3D-Assistent

• Defect #5294: eluCad crash during intersection cut search in assistent
• Feature #5209: Hand over quantity of cuts

Bar Optimiser

• Defect #5177: The setting for the retract opening is no longer taken into account for STO1&STO2.

Commandline

• Defect #5276: Command line option is started before opening the document

Coordinate System

• Defect #5292: work sides change when saving a macro // ELUCAM coordinate system

Installer & WebUpdate

• Defect #5149: Latest VC++ 2008 Redistributable isn't recognized by the installer

Settings

• Defect #5206: Modify settings for add new SBZ 151 Axium target machine
• Feature #5262: Output commission as part ID

Setup-Sheet & Reporting

• Defect #4864: Differences in the profile view

Special functions

• Defect #5169: STO2 deletes profiles

Tool Database

• Defect #5297: New tool update error
• Feature #5310: Machine tool exchange during clamp editing

User Interface

• Defect #5321: Crash after deburr insert

Bar Optimiser

• Defect #4960: STO V2 // Post-optimization deletes or adds profiles
• Patch #5130: STO2 post-optimization off by default

DGX

• Feature #5114: Read program name from DGX file name
• Feature #5115: EDGX Parameter supports both file and folder paths

DXF & DWG Import/Export

• Defect #5183: DXF export from back is not correct
• Feature #5066: Pass DxfExportInactiveWorks setting to edits
• Patch #4955: DXF export shows disabled macros

Data Format

• Patch #5124: New NCMs and NCCs templates for SBZ6XX

Installer & WebUpdate

• Feature #5224: New TeamViewer QuickSupport Version

Localization

• Patch #5198: Notch variants not localized

Notching

• Defect #5094: Notch error

Settings

• Feature #5154: Setting for saw diameter in 3D window
• Patch #4987: Larger max. length for barcodes

Setup-Sheet & Reporting

• Defect #4897: Wrong diameter in set-up sheet
• Defect #5102: Profile is displayed mirrored

User Interface

• Defect #5079: Elucad crashes
• Defect #5089: Condition "0" cannot be deleted
• Defect #5160: Saw blade is displayed incorrectly in inches
• Patch #5229: Info for create new tab shows close tab

Variables

• Defect #5117: Variable outputs wrong value

3D Import

• Defect #4784: Profile is not recognised

Commandline

• Defect #5095: Crash during NC run via command line
• Feature #5090: Commandline DGX import

DGX

• Defect #5108: DGX function no longer works
• Feature #5032: Automatic documentation of DGX template syntax
• Patch #5029: DGX-HTML output not complete

Installer & WebUpdate

• Patch #5059: Perform webupdate check in temporary folder

Macros

• Defect #5004: The Reload groups option removes the macro from the work row

Settings

• Patch #4458: Adjust default value for 3D import

User Interface

• Defect #5046: Elucad Crashes when closing Job

Works & Free Sides

• Defect #4990: Saw assistant misbehavior

3D Import

• Feature #4834: Exclude sides from 3d import based on machine capabilities
• Feature #4909: Consider (in)active sides during detection

Bar Optimiser

• Defect #4994: eluCad crash at STO & STO2

Core

• Defect #4949: Crash when entering variables in depth

Localization

• Defect #5036: Language setting for plugins
• Patch #4983: Localization for 3d import tool

Machine Code Generation

• Defect #4853: Crash after NC run

Tool Database

• Defect #4818: New tool update does not work correctly
• Defect #5020: OAutoWRotation is added automatically after tool change
• Patch #4950: Remove mount for saw in SBZ628 tool package

User Interface

• Defect #4971: Warning selection does not work
• Defect #5037: Tab "window" in new version
• Patch #5017: eluCad Launch changed

Works & Free Sides

• Defect #4854: Freeform is not recognized

eluCloud

• Patch #4931: NC-Run eluCloud Upload logging
• Patch #4933: Changed eluCloud Upload syntax
• Patch #5033: eluCloud upload with 3D-view not possible

3D Import

• Defect #4851: Force machining from top works only partially

Bar Optimiser

• Defect #4810: STO2 no result
• Feature #4877: Bar Optimizer 2 optimizes number of bars but not cut rest length

CAD Editor

• Defect #4883: Cancel when saving DXF does not abort

CSV-Import

• Defect #4874: After CSV import machinings disabled

Data Format

• Defect #4843: Mirror part in X rejects free forms
• Defect #4878: UTF-8 BOM ECW files are not read correctly

Free Millings (Editor)

• Defect #4751: Tab key should mark next line
• Defect #4764: Changing an existing freeform not possible
• Defect #4789: Angle and length values closes the free-form editor
• Defect #4797: Crash when entering ISO code
• Feature #4759: Tooltip display of evaluated expressions in free milling editor fields

Notching

• Defect #4920: AKM notching: drop side in front - machining incorrectly
• Feature #4781: New notch variants for SBZ631

Plugin API

• Feature #4886: Warnings/Errors/Log messages sent by (pre-)nc-run operations

Settings

• Defect #4865: Sorted list setting: Expand incomplete setting value

Special functions

• Defect #4869: Macro variables are deleted during macro reloading
• Defect #4906: Macro reload takes very long

User Interface

• Feature #4862: Integrate warnings/errors from REST API Tool database exchange in NC run window

3D Import

• Patch #4710: Duplicate notches

Bar Optimiser

• Defect #4786: bar optimiser v2 crashes
• Patch #4791: Export from bar optimizer sorted by rest length

CSV-Import

• Defect #4819: After CSV import groups disabled

Data Format

• Feature #4805: PrintServer on 628

Free Millings (Editor)

• Defect #4750: delete key leads to strange result

Installer & WebUpdate

• Patch #4848: SBZ63X default setup

Localization

• Defect #4788: Translation not possible

Notching

• Patch #2309: Works offset to protect material during notching
• Patch #2654: Shape usage for notches
• Patch #4776: Finishing before notching

Settings

• Patch #4817: Setting for document version handling

Setup-Sheet & Reporting

• Defect #4650: Function print setup sheet does not work
• Defect #4754: Customized setup sheet does not work
• Defect #4772: Incorrect total length in the set-up sheet
• Feature #4188: Output of a cutting list

Special functions

• Defect #4438: Job tree sorted by profile name only

Tool Database

• Defect #4816: Tool update takes place after test run instead of before

User Interface

• Defect #4809: Clamp is in the wrong place

Works & Free Sides

• Defect #4782: Macros become groups in the rotated part
• Feature #4640: STOP after sawing waste piece

3D Import

• Defect #4678: Crash with active option "Recess as rectangle"
• Defect #4679: Saw cuts come from the wrong side
• Defect #4694: Free form has the diameter 0
• Feature #4706: 3D model is not or not correctly recognised

3D View

• Defect #4733: Elucad crashes when measuring in 3D window

3D-Assistent

• Defect #2321: Filter profiles has no function

Bar Optimiser

• Defect #4738: STOV2 wrong values for bar calculation
• Defect #4739: STOV2 does not supply individual parts

CAD Editor

• Defect #4616: eluCad crash when saving the DXF

DGX

• Defect #4674: Mark empty parts for machinings with condition

Free Millings (Editor)

• Defect #4644: Editor only works correctly with 6 decimal places
• Defect #4670: Number of steps changes by clicking into the graphic
• Defect #4690: Fillet individual corners does not work properly
• Defect #4752: Use of + and -
• Defect #4753: Dimensional chain is not charged

Plugin API

• Defect #4700: Measurements are not counted up according to STO

Special functions

• Feature #4000: bar program possible at SBZ 6xx

Tool Database

• Defect #4708: Missing angle head rotation values
• Patch #4641: New picture for combination thread milling cutters
• Patch #4747: Display immersion feed rate level 2
• Patch #4758: Neue Werkzeuge in aktuelle Version aufnehmen

User Interface

• Defect #4668: Generate saw cuts are deactivated
• Patch #4452: Color in the profile should also go with numbers values

3D Import

• Defect #4437: Wrong and too deep contour detection
• Defect #4510: eluCad crash by 3D-Import Assistent
• Defect #4580: High Z value after import
• Defect #4662: Sat files import problem
• Feature #1193: Operations on free planes (A&C) are not recognized

3D-Assistent

• Defect #4677: Assistant closes again after opening
• Defect #4682: Assistent closes when pressing next or import without detection as of version 4.1.28.XX

Bar Optimiser

• Defect #2987: STOV2 takes to much bars
• Defect #3683: No result after STOV2
• Defect #3868: Bad bar optimisation
• Defect #4324: Bad optimization after bar optimizer
• Defect #4645: STV2 Bad result
• Defect #4684: STOV2 does not charge a cut section although active
• Patch #4196: Keep cut numbers

Formulas & Variables

• Defect #4676: Mirror cut in X incorrect

Free Millings (Editor)

• Defect #4660: Fillet does not work

Installer & WebUpdate

• Patch #4685: Update Microsoft Visual C++ Redistributable forr Visual Studio 2015, 2017 and 2019

Setup-Sheet & Reporting

• Defect #4280: Incorrect profile display on the set-up sheet
• Defect #4316: Tools are not displayed
• Defect #4442: Set-up sheet shifts specifications
• Defect #4634: Tool display in the set-up sheet

Special functions

• Patch #4439: Delete option "Select works" from action tab

User Interface

• Patch #4436: Height and width of the profile can be changed in the Details window

Works & Free Sides

• Defect #4651: Depth of signature changes after NC
• Defect #4680: Saw assistant no longer works correctly as of V4.1.28.XXX
• Defect #4681: Set length reference to H no longer works as of version 4.1.28.XXX

eluCloud

• Patch #4630: Setting for exported parts ID

3D Import

• Defect #4555: Detected depth is not correct
• Defect #4556: Free form is divided into two operations

3D Model

• Defect #4659: Import stops at Recognizing features

Bar Optimiser

• Defect #4487: Option "Long parts first" is ignored
• Defect #4554: Free form changes after bar optimiser
• Defect #4601: Bar optimization in inches >Bad result

CAD Editor

• Defect #4535: DXF is not displayed correctly

Coordinate System

• Defect #4579: Automatic changes of copied operations

Data Format

• Defect #4557: Update of the EVersion

Free Millings (Editor)

• Defect #4418: Freeform changes after reverse path
• Defect #4450: Freeform editor changes freeform
• Defect #4473: Fix UI bindings
• Defect #4495: Rework Back/Next Navigation for Segment List
• Defect #4537: Impossible to change the freeform
• Defect #4538: Diameter 10 not possible
• Defect #4539: Free form changes after changing the WKZ compensation
• Defect #4540: Arc no longer works
• Defect #4541: Locking cylinder is no longer output correctly
• Defect #4542: Formulas in X-coordinate are lost after changing the freeform
• Defect #4642: When deleting all points the editor closes

Settings

• Defect #4635: Code entry SPMA no longer works

Setup-Sheet & Reporting

• Defect #4515: Set-up sheet is not created at the customer

User Interface

• Defect #4595: Too many entries in the depth table

Variables

• Defect #4157: Edit invalid data format after edit clamping

3D Import

• Defect #4419: Starting point of the free form is not at 0
• Defect #4427: Sat files can no longer be imported
• Defect #4478: 3D Import closes eluCad without message
• Defect #4480: Free defined plane far from profile
• Defect #4482: Alignment not possible
• Defect #4499: Assembly cannot be imported
• Defect #4517: incorrectly detected saw cut
• Defect #4534: Unclear division of assemblies

3D View

• Defect #4407: 2D-View incorrect

3D-Assistent

• Defect #4398: No import via 3D Assistant
• Defect #4443: Import via 3D Assistant not possible
• Defect #4468: Adjusted rotational position is lost
• Defect #4474: 3D import wizard with recognition does not work
• Defect #4530: Assembly cannot be opened

Bar Optimiser

• Defect #4479: Parameter after bar optimiser in INCH not correct

CAD Editor

• Defect #4308: DXF is displayed incorrectly

DXF & DWG Import/Export

• Defect #4491: DXF is shown in yellow

Free Millings (Editor)

• Defect #4200: Selected tool is switched to automatic after acceptance
• Defect #4409: Tool path is displayed incorrectly after mirror
• Defect #4451: Freeform editor opens in the background
• Defect #4490: Splash screen not shown

Localization

• Defect #4498: Misssing english translation in CAD-editor
• Patch #4492: Translation key assigned twice
• Patch #4551: Spanish language selection

Setup-Sheet & Reporting

• Defect #4397: Error in the set-up sheet creation

Special functions

• Defect #4494: Calculate depth table -> deactivated automatic post intrusion is ignored

User Interface

• Defect #4368: Direction of movement changes after part is mirrored in X
• Defect #4420: Drag values to depth are not correct
• Feature #4513: Support for screen zoom
• Patch #4433: Remove zip export option

Variables

• Defect #4529: Variable in raw bar length is discarded

3D Import

• Defect #4096: Free form is recognized incorrectly
• Defect #4356: Error after import
• Defect #4357: Profile cross section is not recognized correctly
• Defect #4400: Saw cuts shifted in X
• Defect #4401: 3D Import, OCC Exception
• Feature #3788: Nibble option for 3D Import

3D View

• Defect #2969: Crash after selection of edits

3D-Assistent

• Defect #4412: 3D Import assistent no longer opens
• Defect #4422: 3D import assistent closes during the cross section search

Bar Optimiser

• Defect #4306: Active retract opening is rejected or not accepted

CSV-Import

• Defect #4386: Import aborts if rows are not empty

Core

• Patch #4332: Update Eyeshot

DXF & DWG Import/Export

• Defect #4402: Opening DXF no longer works

Free Millings (Editor)

• Defect #4212: Tool path displayed twice after mirroring
• Defect #4410: Tool path view for semicircle wrong
• Defect #4426: New free milling editor doesn´t work
• Defect #4432: Diameter always 0
• Defect #4434: 64-Bit localization files missing
• Defect #4448: Free form editor does not open
• Defect #4449: freeform editor changes depth

Notching

• Defect #4391: Warning although part deactivated by condition

Special functions

• Defect #4223: Automatic calculation of DT for macros does not work for 2 DT entries
• Defect #4346: Calculate depth table automatically deletes post intrusion
• Feature #4411: Clamping position rotation for job automatically during NC run
• Patch #4233: Changed search order when reloading macros

Tool Database

• Defect #4415: Tool cooling is switched off with the new tool update

User Interface

• Defect #4367: Number of the row is lost
• Defect #4375: Illustration of the saw blade holder

eluCloud

• Defect #4464: Cut information missing with eluCloud upload

3D Import

• Defect #4153: 3D import in inches sets raw bar length in mm
• Defect #4187: No machining operations are detected
• Defect #4189: Profile is misaligned
• Defect #4244: Profile cannot be aligned in inches
• Defect #4281: Crash risk after 3D import
• Feature #195: Works are not recognized correctly

3D View

• Defect #4310: Chop cuts are wrong

CAD Editor

• Defect #4227: Contours for texts are not closed in the CadEditor

Code CleanUp

• Defect #4354: OBJ files in eluCad Temp directory

DGX

• Defect #4226: Wrong length in Html Output from DGX interface

DXF & DWG Import/Export

• Defect #4345: DXF cannot be imported

Data Format

• Feature #4314: Barcode output in NCW documents

Free Millings (Editor)

• Defect #3766: Graphical error at contour
• Defect #4062: Graphics error Lock cylinder for tool offset left & right
• Defect #4211: Free milling editor changes the free milling
• Defect #4286: Running direction changes the machining position
• Defect #4294: Number of machining operations for 2nd free form incorrect

Macros

• Defect #4199: For mirrored macros, the depth of machining operations can no longer be pulled

Performance

• Defect #845: Bad perfomance while save macros or open documents

Pocket Milling & Cleaning

• Defect #4104: Freeform is milled too big

Settings

• Defect #4298: 6xx New target machine 630-PP with wrong Ncm & Ncc

Setup-Sheet & Reporting

• Defect #4179: Create setup sheet error
• Defect #4192: Template from setup sheet does not work
• Defect #4260: Setup sheet error
• Defect #4290: Creation of the set-up sheet not possible

Special functions

• Defect #4056: Reload Macro and Group // Groups do not become macros

UI (Work Table)

• Defect #4232: Expanded saw cut is shifted into a group

User Interface

• Defect #4150: No residual length display for the slew angle
• Defect #4180: Chop cut angle is shown in a wrong way
• Defect #4291: typing error
• Defect #4295: Retract opening remains active even after deactivation

Works & Free Sides

• Defect #4210: Saw cut wizard changes the free side
• Defect #4235: signature depth changes after saving and opening
• Defect #4258: Depth of signatures changes after opening the ECW
• Defect #4288: First automatic depth is 0
• Defect #4296: WX1 is not always considered

eluCloud

• Defect #4343: eluCloud Autoupload slows down the upload

3D Import

• Defect #4070: Sloping is recognized as a rectangle
• Defect #4098: Different recognition due to the profile position
• Defect #4222: Detected depth is not correct

Bar Optimiser

• Defect #4083: After the bar optimizer, assigned measuring runs are discarded
• Defect #4109: Crash after bar optimiser
• Defect #4164: Cuts are gone after optimization, others are too much (Bar optimiser V2)

CSV-Import

• Defect #4094: Crash when importing the CSV file and active setting: Warning about expiring functions
• Defect #4194: Error during CSV import variables PW,PL,PH

Data Format

• Defect #4198: Quotation marks in "condition cut"

Databases

• Defect #4162: Refresh problem if macro DB machine specific

Free Millings (Editor)

• Defect #4015: eluCad crash due to freeform editor
• Defect #4111: 3mm corner radius will be milled with a 8mm miller
• Defect #4146: Working direction does not change with reverse path
• Defect #4147: The start and end point is recognized as the center of the cutter
• Defect #4151: Tool path shows other running direction than contour
• Defect #4168: Tool path changes automatically
• Defect #4177: Free form editor changes the free form

Localization

• Patch #4191: Update Spanish language file
• Patch #4213: Czech language in standard

Notching

• Defect #4120: Notch-assistent creates data garbage in the BIN folder

Numeric

• Defect #4178: Cutting angle is not converted

Pocket Milling & Cleaning

• Defect #4130: Free forms do not have the tool diameter

Settings

• Feature #4202: New Ini-Connector for upstream software

Setup-Sheet & Reporting

• Defect #4099: Representation of clamping position and cutting angle incorrect
• Defect #4158: Incorrect angle display on the setup sheet

User Interface

• Defect #3846: Highlight selected group / macro in 2D view
• Defect #4085: Error tone when clicking on clamping situations
• Defect #4175: Profile parameters are not loaded

Works & Free Sides

• Defect #4088: Assigned measurement runs are not accepted when the parts are copied
• Defect #4110: Free Milling segments using formulas may be lost when opening file
• Defect #4116: Wrong zero point by tangent angle in x-axis
• Feature #3178: Representation of the saw cut
• Feature #3999: Origin change for complete order

3D Import

• Feature #3403: More accurate detection during 3D import

3D View

• Defect #3989: Freeform changes after bar optimizer
• Defect #4048: Clean cut at notch B = 90 ° not visible

Bar Optimiser

• Defect #3979: [STOV2] Colors are not considered

C#

• Patch #4029: Remove Core.Services._Elumatec

CSV-Import

• Defect #3942: Error during CSV import variables H and Y

Commandline

• Feature #4040: Call STOV2 over command line

Free Millings (Editor)

• Defect #3996: Comma can not be used anywhere
• Defect #4038: Freeform editor | toolpath wrong
• Defect #4053: After closing the freeform, eluCad deactivates settings
• Defect #4058: Editor changes freeform after reverse path
• Defect #4059: Keyhole mirror in X & Y changed contour
• Defect #4063: Delete Graphic | Free milling editor
• Defect #4081: Circle is not recognized
• Defect #4123: Invert path changes the free form
• Feature #3967: Output number of decimal places from freeform editor

Installer & WebUpdate

• Patch #4026: Changes for SBZ628 machine types for Installer

Job-Tree

• Feature #4002: Set bar ID automatically
• Feature #4003: Marking parts with disabled edits

Localization

• Defect #3994: Missing translation

Notching

• Defect #4061: After changing the notch side, save is not active

Pocket Milling & Cleaning

• Defect #3924: Clearing the freeform does not work
• Defect #3991: Priority change to -1
• Defect #3992: Unfortunate prioritization
• Defect #3993: Free milling editor problems with circle segments
• Defect #3995: Contour is only cleared up to the middle track
• Defect #4031: Pocket milling produces G0 (according to FMEC)
• Defect #4068: Broachassistent doesn´t work

Setup-Sheet & Reporting

• Defect #4086: Can´t create setup-sheet

Special functions

• Defect #4028: Post intrusion is activated after NC-run
• Defect #4036: Pre-drilling only possible with a drill

eluCloud

• Feature #4044: automatic eluCloud-upload

3D Import

• Defect #3894: Detected depth is not correct

3D-Assistent

• Defect #3902: Edits are positioned incorrectly

Bar Optimiser

• Defect #4014: Bar optimizer deactivates the height measurement

Core

• Defect #3951: retract opening will be deactivated

DXF & DWG Import/Export

• Defect #3910: DXF Imort faulty
• Defect #3921: Crash after DXF option: accept single lines
• Defect #3986: Profile and fixtures export in inch

Data Format

• Defect #4008: WSide is not taken into account in the one-sided macro

Free Millings (Editor)

• Defect #3926: Segment type change does not respond
• Defect #3927: freeform change by clicking length and angle
• Defect #3938: Behavior of tab and mouse click in freeform editor
• Defect #3953: Freeform is being modified
• Defect #3962: keyhole (freeform editor) doesn´t work with inch
• Defect #3963: Measurement in inch is very big (freeform editor)
• Defect #3964: Take over decimal places from freeform editor to eluCad
• Defect #3980: Values don´t be convert in inch
• Defect #3983: Max. 3 decimal places for dimension display
• Defect #4034: Freeform is changed

Installer & WebUpdate

• Defect #3959: During installation, the unit of measure is not adopted
• Feature #3865: Registry entry for NCO ad
• Patch #3954: eluCad Installer needs to install License Management Center as a requirement

Notching

• Defect #3847: Clean cut representation when notching
• Defect #3937: Notching is performed twice
• Defect #3961: During copy notching, 2 without b-angle wrong value

Numeric

• Defect #3941: Rounding error at cutting angle

Plugin API

• Defect #4025: eluCad crashes with error message with new tool calibration

Pocket Milling & Cleaning

• Defect #3426: Presentation from "Broach Assistant" by low resolution
• Defect #3925: No longer possible to broach
• Defect #3965: It does not work with unit INCH.
• Feature #3966: Hand over decimal places in parameters

Profilsplitter

• Defect #3911: Error in automatic station selection
• Defect #4013: Profile Splitter disables height measurement

Settings

• Patch #3929: Changes to target machines SBZ628S / XL / XXL
• Patch #3971: Number of decimal places: 0-6 allowed

Setup-Sheet & Reporting

• Defect #3879: Setup sheet shows the wrong setting
• Defect #3903: Change the number of decimal places in the setup sheet
• Defect #3904: Error after closing the setup sheet
• Defect #3905: Error after saving the setup sheets

UI (Work Table)

• Defect #3981: decimal places limited to 4

User Interface

• Defect #4039: Profile length with minus value

Variables

• Defect #3975: Variable TW is evaluated incorrectly in INCH

Works & Free Sides

• Defect #3870: Create a signature incorrectly

3D Import

• Defect #3751: Force work from above works conditionally
• Defect #3878: Use DXF-Name for profile search doesn´t work

3D View

• Defect #3829: Wrong representation of double clamping
• Feature #3157: Show station limit

3D-Assistent

• Defect #3570: Profile export from 3D import assistent in inch

Data Format

• Defect #3835: Convert cutting angle is not taken into account in the DGX export
• Defect #3893: Crash after ecw opening
• Feature #3901: Trigger signature with upstream software

Free Millings (Editor)

• Defect #3795: Misconduct when eluCad language is Russian
• Defect #3805: Language partly in English
• Defect #3838: Calculation option in coordinate fields
• Defect #3854: Crash after grid activation (freeform editor)
• Defect #3857: Der Freiformeditor hat die frei definierte Ebene geändert
• Defect #3858: 3-stelliger Radius wird übernommen
• Defect #3875: Crashing by opening freeform editor

Installer & WebUpdate

• Defect #3781: Identification from CodeMeter driver not properly

Localization

• Defect #3794: Missing translation

NCX-Run, AV, PPs

• Defect #3888: Notching is not performed

Notching

• Defect #3890: by copy notching: 2 without b-angle wrong value

Pocket Milling & Cleaning

• Defect #3784: No priorities for broaching contours

Setup-Sheet & Reporting

• Patch #3851: Profile pictures in the DGX HTML report as PNG

Special functions

• Feature #3081: Calculate depth tables of macros during NC run

Tool Database

• Defect #3916: New tool update
• Feature #3277: New ECI tool update
• Feature #3281: Extension of target machine settings for ECI-Connector Plugin

User Interface

• Defect #3866: Aborting the new freeform editor may lead to follow-up crashes
• Defect #3877: View | Directories | Setup sheets has no function

Works & Free Sides

• Defect #3485: Wrong order of combination thread (countersink)

eluCloud

• Feature #3872: Data transfer to eluCloud

3D Import

• Defect #3752: free milling is detected although it’s deactivated
• Defect #3773: eluCad is closing without any note

3D-Assistent

• Patch #3648: Enable double-click when selecting a profile

Bar Optimiser

• Defect #3739: Post intrussion setting is not taken into consideration (inch)
• Defect #3742: Empty profiles after optimization
• Defect #3832: Retract opening always active after bar optimiser
• Feature #3821: Bar ID after optimization

CAD Editor

• Defect #3727: Contour in new DXF is not recognized correctly

CSV-Import

• Defect #3792: WDepthCalc= 1 is not provided in CSV import

Data Format

• Defect #3786: NCW contour segments are not written out

Formulas & Variables

• Defect #3785: PH/H error when opening the ECW

Free Millings (Editor)

• Defect #3769: Closing of the editor is considered as accepting
• Defect #3770: Diameter with variables is not calculated
• Defect #3772: Feed output is incorrect
• Defect #3775: Scaling has no function
• Defect #3782: Reverse path for contours with radius goes wrong

Installer & WebUpdate

• Patch #3803: Deactivate certificate check of installer until new certificate is available

Job-Tree

• Patch #3822: Bar ID after optimization

Localization

• Patch #3747: Localization syntax for installer
• Patch #3748: Change external settings of C# from country specific to global language codes
• Patch #3750: New version of TRex Tool / Konfigurator

Notching

• Defect #3698: While expand notch eluCad freezes
• Defect #3810: Bottom notch not possible with disc mill cutter

Plugin API

• Defect #2749: Missing profile pictures in DGX output

Probing

• Defect #3796: Safety distance of probe is added to depth of edge measurement

Settings

• Patch #3381: Include postprocessing in the default values

Setup-Sheet & Reporting

• Patch #3685: Create setup sheet automatically

Testrun

• Defect #3732: Test run checks wrong tool database

User Interface

• Defect #3679: Bar ID changed after 7 digit value
• Defect #3831: Variables are not valid in free milling surface
• Defect #3837: Texts in license manager window not readable
• Feature #1140: Manual selection of saw blades in bar program
• Feature #3808: Filter variables

Variables

• Defect #3714: Message: The internal variable 'clength' is not available in this field

Works & Free Sides

• Defect #3581: If there are several mirrored/unmirrored groups, the depth of machining operations can no longer be dragged

3D Import

• Defect #2782: Processing is not correctly recognized
• Defect #3575: Nibble off doesn’t work anymore
• Defect #3632: Detected processed are too deep
• Defect #3670: Processing is not correctly recognized
• Defect #3672: Detected depth is not correct
• Defect #3674: Processes are not correctly detected
• Feature #3633: Detection of skewed processes

3D View

• Defect #3592: Profile is transparent until „editing“ is changed

3D-Assistent

• Defect #3637: Corners are not detected
• Defect #3697: Seminautomatic alignment doesn’t work

Bar Optimiser

• Defect #3644: Retract opening always active after STOV2
• Feature #3617: Extended report for bar optimiser

CSV-Import

• Feature #3701: Defining signature texts via CSV import

Clamping

• Defect #3690: No detection of unknown variables in clamp situation

Core

• Defect #3613: Option „restore document“

Data Format

• Defect #3635: Angle in saw file are wrong
• Defect #3675: free milling is not milled correctly
• Defect #3676: EluCad can’t load and display profiles & macros

Free Millings (Editor)

• Defect #3654: Free milling is changed
• Defect #3700: While opening the editor variables are rejected.
• Defect #3743: Coordinates with variables are discarded after opening
• Defect #3744: Tool path no longer visible with closed contour
• Defect #3745: Free milling mirroring does not work
• Defect #3767: Direction remains unchanged during mirroring
• Defect #3768: Diameter is no longer accepted
• Feature #3559: Show variable list of EluCad in freemilling editor

Installer & WebUpdate

• Defect #3721: Problem with 32bit system
• Defect #3771: Webupdate doesn’t work anymore
• Patch #3256: Warning before reboot of Windows

Notching

• Defect #3579: Different layout of notching since eluCad 4.1
• Defect #3695: notch methods show different results
• Feature #3442: Alternate parameter for notch

Pocket Milling & Cleaning

• Defect #3453: Post instrusion is not considered
• Defect #3660: Table of depth: read in start value of broach
• Defect #3665: Table of depth if overwritten after broach
• Patch #2730: show infeed width after finishing

Profilsplitter

• Feature #2946: Proof if bars can be produced at both stations

Setup-Sheet & Reporting

• Defect #3667: Error message during setup sheet generation
• Defect #3668: Tool information from machinings in group and macro not listed

Tool Database

• Feature #264: Order number of tools in database

User Interface

• Defect #3532: Correct calculation of rest limit
• Defect #3647: Variabel is not detected automatically in clamp conditions
• Feature #1321: TMaxCut of drill

3D Import

• Defect #3364: Parts are not imported anymore with 3Decw
• Defect #3440: Editing is detected as beeing too big
• Feature #2293: SAT assembly import
• Feature #2294: Converter from 3d formats to STEP

3D View

• Defect #3508: Display of clamps SBZ 141 in eluCad

3D-Assistent

• Defect #3367: Error when opening the profile database - C# EPD Reader does not recognize circles
• Defect #3580: Error when opening profile database
• Feature #3410: Unit of measurement is always metric

C#

• Feature #3243: TermParser in .NET

DXF & DWG Import/Export

• Defect #3415: Wrong Y offset in DXF export
• Defect #3571: Copying from DXF doesn’t work
• Defect #3598: DWG can’t be loaded in eluCad CAD editor

Data Format

• Defect #3397: Sawing position does not work

Free Millings (Editor)

• Defect #2895: New free milling editor doesn’t allow variables
• Defect #3455: Toolpath isn’t displayed correctly
• Defect #3569: Crash at creation of free milling
• Defect #3582: Length and angular is always 0

Installer & WebUpdate

• Defect #3656: Version 4.1.18.3422 updater problem
• Defect #3666: Requirements problem on update
• Feature #3530: Web update requirements check

Localization

• Defect #3621: Add „Chinese“ language
• Defect #3651: Language can’t be changed

Probing

• Defect #1350: Measure run visualization: Wrong distance
• Defect #2037: Orientation change misplaces measure run
• Defect #3546: Measuring runs after clamp machining not assigned
• Defect #3556: Part rotation without machining rotation discards free sides in measuring groups

Settings

• Defect #3578: Error when new target machine is added or copied
• Defect #3649: Create new target machine is incorrectly

Setup-Sheet & Reporting

• Defect #3396: Tool information is not displayed correctly

Testrun

• Defect #3510: Precheck isn´t identical to machine
• Defect #3566: Pre check no longer works

Tool Database

• Defect #3622: TPitch/TMaxCut isn’t converted

UI (Work Table)

• Defect #3259: Cutting loss is already deducted for a part on the bar
• Defect #3527: Free milling is always displayed in group below

User Interface

• Defect #3561: Clamp of station 0
• Defect #3638: If new target machine is added, correpsonding path is not created

Variables

• Defect #3645: Variable „WL“ is not accpected anymore

Works & Free Sides

• Defect #1695: Measurements are not updated when changing cut orientation
• Defect #3560: Write protection for the new macro

3D View

• Defect #3284: Contour incorrect after DXF import
• Defect #3454: Display incorrect after DXF import

3D-Assistent

• Defect #3409: DXF cannot be created

C#

• Patch #3503: Job tree support for term parser
• Patch #3514: Hide unsupported settings / actions until supported
• Patch #3515: Allow disabling hardware acceleration

Core

• Defect #3450: After eluCad crash ECW can no longer be opened

DXF & DWG Import/Export

• Defect #3436: DXF import creates wrong contour

Data Format

• Defect #2148: Profile detection bug
• Defect #3507: Probe doesn't work

Free Millings (Editor)

• Defect #3501: Freeform is moved after open it in the editor
• Defect #3526: Diameter and direction are not taken
• Defect #3547: Standard diameter always 0
• Defect #3548: Tool path is no longer displayed or displayed incorrectly
• Defect #3549: Freemilling editor closes with error message

Installer & WebUpdate

• Defect #3523: Installer cannot find the installation 4.0
• Feature #3516: Add VC++2012 Redistributable x64 to requirements installed by Installer

Localization

• Defect #3317: Keep set language when loading status report

NCX-Run, AV, PPs

• Defect #3488: Warning and error windows are always displayed

Notching

• Defect #3473: Clean cut option active with transfer of notches from older eluCad versions

Settings

• Defect #3316: Folders are not recognized
• Defect #3539: Tools are not displayed
• Patch #3525: Automtic validation of folder paths

Testrun

• Defect #2142: Test run not working
• Defect #3407: Error on testrun is different from machine error
• Defect #3502: PreCheck doesn't work
• Feature #2337: Load test run settings from machine.org file

Tool Database

• Feature #3279: HMI communication plugin

UI (Work Table)

• Defect #3271: Leerzeichen am Ende des Makronamens verbieten

Works & Free Sides

• Defect #3351: For mirrored macros, the depth of machining operations can no longer be pulled
• Defect #3383: Macro retains write protection after removal
• Defect #3386: Side of single sided macros on free side is discarded after saving the document

3D Import

• Defect #3069: Assembly import: eluCad crashes immediately

3D View

• Defect #3217: Clamps are displayed in the wrong position
• Defect #3272: Halbkreis wird als Linie angezeigt
• Feature #628: Highlight selected clamps in the 3D view

3D-Assistent

• Defect #3039: 3D assembly is not displayed correctly
• Defect #3087: Exception when loading a STEP file
• Defect #3416: Error in the 3D view when opening the assembly
• Feature #3394: 64-bit version of the 3D Import Wizard
• Feature #3412: Deploy 3d import assistant in x86 and x64

Bar Optimiser

• Defect #3411: Bar Optimiser v2 crash after license error in testversion

Clamping

• Defect #3325: Message: No clamps defined during NC run
• Patch #3221: Prohibit manual clamping situation with orientation change

Core

• Defect #2738: Error & crash when closing document

Data Format

• Defect #3413: Umlauts in the document name are interpreted incorrectly after the crash

Free Millings (Editor)

• Defect #3350: First line in free-milling missing
• Defect #3390: Freemilling editor oes not accept standard diameter
• Defect #3437: Contour is displayed incorrectly in freemilling editor
• Defect #3457: Feed is output incorrectly

Installer & WebUpdate

• Feature #3393: Add bin64 Folder to Core installer module
• Patch #3338: Warning before restart

NCX-Run, AV, PPs

• Feature #3380: Management options for pre-functions of the NC run

Notching

• Defect #3238: Result after expand notch does not match the notching graphically
• Defect #3309: Machining position "cut" is not maintained

Pocket Milling & Cleaning

• Defect #2331: Hide function for ELU coordinate system
• Defect #3285: Unnecessary milling path in inch
• Defect #3391: infeed width always max 50% only
• Defect #3414: Broachassistant freezes at second time
• Defect #3432: Depth is always 0
• Defect #3438: Post intrusion alway active
• Defect #3439: Log is not deleted
• Feature #3424: Display of the generated milling paths during clearing out

Special functions

• Defect #3400: Unknown document after sort job tree
• Feature #2222: Sort job tree automatic before NC run
• Feature #3213: Assign cut numbers automatically during NC run

UI (Work Table)

• Defect #3270: Remember path when saving the variable list
• Defect #3429: Crash after paste the clamp positions

User Interface

• Defect #3491: Crash after choose new target machine
• Feature #2726: Show target machine name bigger
• Patch #3229: Mouse wheel manipulates dropdowns in settings

Variables

• Defect #3166: When importing job variables, the comment is shifted

Works & Free Sides

• Defect #3349: Different behavior by open the free-milling editor
• Patch #3261: Hide Gripper / small X-axis for groups, macros and saw cuts

3D Import

• Defect #3162: Free plane is positioned far outside the profile
• Defect #3196: 3D-Import stoppt bei "Anaylsing-Profil".
• Defect #3199: Automatic assembly import no longer works

3D-Assistent

• Defect #2815: Transparency setting does not work properly

Bar Optimiser

• Defect #3216: Bar optimiser does not produce a result
• Defect #3220: Bar optimizer v2 does not work

CAD Editor

• Defect #3173: Colors & Layers in DXF/DWG

Core

• Defect #3185: Writing ECW with work condition
• Defect #3200: Crash by edit clamps
• Defect #3205: Macros with saw cuts may be exported incorrectly
• Defect #3293: Output folder is deleted if NCW export fails during NC run
• Feature #3082: Conditions for clamps in manual clamping situations

DXF & DWG Import/Export

• Defect #2132: Incorrect conversion of path segments during DXF import
• Defect #2774: Export DXF from 3D window not correct
• Defect #3187: Crash when loading DXF/DWG files
• Feature #3132: Geometry conversion support for additional types

Data Format

• Defect #3110: File output of eluCad not UTF-8 compatible
• Defect #3287: UTF8 conversion of old ECW files

Databases

• Defect #3204: eluCad crash when importing the macro database

Free Millings (Editor)

• Defect #2905: Tool path in freemilling editor is not displayed correctly
• Defect #2957: Incorrect approach movement with standard contours
• Defect #3083: Faulty tool path for locking cylinder
• Defect #3155: Radius missing
• Defect #3156: Missing translations
• Defect #3190: Length and angle remain at 0

Installer & WebUpdate

• Defect #3099: Requirements installation text overlapped
• Defect #3207: Test version can no longer be updated

Localization

• Defect #2674: STOV2 cannot be translated
• Defect #3075: 3D assembly import cannot be translated
• Defect #3209: Missing translations
• Defect #3265: Missing translations in ImportEPD

NCX-Run, AV, PPs

• Defect #2975: Processor load after and during NC run
• Defect #3230: Signature calculation by edit clamping

Notching

• Defect #3161: Priorities for notchings are ignored
• Defect #3318: The sequence of sawcuts at a notch differs from eluCad 4.0
• Patch #3326: Expand notch as a sawcut with notch angle

Pocket Milling & Cleaning

• Defect #3034: With INCH no islands remain
• Defect #3276: Broachassistant square contour

Probing

• Defect #1714: Measure runs not updated correctly for orientation change / clamp editing
• Defect #3239: Error in output of edge measurements within the profile

Settings

• Defect #2124: Handling DXF files with fixtures
• Patch #3107: Unified setting for fixture geometry export

Setup-Sheet & Reporting

• Defect #2217: Profile rendering issue in setup sheet
• Defect #3167: Profile picture is no longer correct
• Defect #3206: Error when creating setup sheets created by the user
• Defect #3231: Setup sheet is not created
• Defect #3286: Error message when creating the setup sheet
• Defect #3292: Deactivated parts in order -> Error

Special functions

• Defect #3150: Group in group while hashing & replacing macros
• Defect #3151: Free plane missing with macro hash
• Defect #3175: Crash when sorting the job tree
• Defect #3219: Option "Calculate depth table when inserting the macro" is lost when saving

UI (Work Table)

• Defect #3193: Warnings for writing contours even when there was no error

User Interface

• Defect #2155: Incorrect part numbering after restore wrong
• Defect #3077: For tap milling cutters, the tool database uses "cut section" instead of "cutting length"
• Defect #3080: Printing disappeared in toolbar
• Defect #3165: Option Use programmed axis position not possible in machining table
• Defect #3214: Tool name is changed
• Feature #65: Possibility to copy clamping values of a clamping situation

Variables

• Defect #3164: Variable D is not evaluated for rectangles

Works & Free Sides

• Defect #3065: Pick a machining from the back in group does not work

3D Import

• Defect #2660: 3D import without cross-section determination and without alignment
• Defect #2993: After importing a assembly always in the TMP directory
• Defect #3096: Incorrect size and length of the profile and cut
• Feature #3088: DXF/DWG Export from 3D Import
• Feature #3095: Profile transfer from 3d import assistant to 3d import

3D View

• Defect #2970: Profile shape is not displayed correctly
• Defect #3130: Profile contour not completely in the profile view

3D-Assistent

• Defect #2306: Assistant freezes on large assemblies
• Defect #3024: Profile is offset by width
• Defect #3058: Assistant stops during import
• Defect #3085: 3D model is not displayed after initialization
• Defect #3093: Profile has the wrong cut length
• Defect #3103: Incorrect zero point of the cross-sectional plane
• Defect #3104: Assembly import does not work
• Feature #3105: Display geometry data in 3d import assistant

Bar Optimiser

• Defect #2716: Baroptimizer V2 incorrect part length calculation
• Defect #3131: All free planes gone after optimization

Core

• Defect #3141: eluCad no longer starts (TEST VERSION)

DXF & DWG Import/Export

• Defect #2877: elucad closes when importing the NCW file

Databases

• Defect #3066: Profile database import no longer has any function

Free Millings (Editor)

• Defect #3054: Translation not possible

Installer & WebUpdate

• Patch #3068: Windows 7 issues with .NET

NCX-Run, AV, PPs

• Defect #3106: Old SBZ6XX PP in test version
• Defect #3121: Crash during NC run or edit clamping

Notching

• Defect #2736: After expand notch, tool stands on automatic
• Defect #2977: Notches are incorrect
• Defect #2996: Notching not possible

Probing

• Defect #3062: Approach distance measuring point in inch
• Defect #3171: Measuring point information is no longer written out

Settings

• Defect #3091: Setting "Export fixture geometry" without function
• Patch #2972: Remove setting for assembly analysis
• Patch #3092: Remove No Export option from Profile-/Fixture-Geometry Export setting

Setup-Sheet & Reporting

• Defect #2887: Problems with larger jobs when creating the setup sheet
• Defect #2998: Job is written 3x in the setup sheet
• Defect #3055: Error while creating a setup sheet

Special functions

• Defect #3098: Option reload macro and groups does not work for macros in work rows
• Feature #405: Machine-specific macro reload before NC Run

Tool Database

• Defect #3101: Update geometry graphic for taps

UI (Work Table)

• Defect #3086: Crash when changing property with selection list for multiple elements
• Defect #3133: Cut section has a double effect

User Interface

• Defect #2342: Read-Only MacroDB mode was hidden from menu
• Defect #2675: Profile database import without function
• Defect #3070: Update problems by hide inactive parts

Works & Free Sides

• Defect #2989: Depth detection does not work

3D Import

• Defect #2693: Machining from the wrong side
• Defect #2928: Crash when importing a assembly
• Defect #2939: Automatic assembly import does not work
• Defect #2961: Assembly import no longer works
• Defect #2990: Profile from database is no longer automatically taken during import
• Defect #3003: Freemillings are not recognized correctly
• Feature #2832: Switch to select 3D-Import for assemblies
• Patch #2978: Refined setting for importing the STL model
• Patch #3031: Marking of cuts in the comment field

3D Model

• Defect #2976: Setting Analyze assemblys always active?

3D View

• Defect #2735: Machinings are displayed in the wrong position

3D-Assistent

• Defect #2994: Wizard crashes on import with features
• Feature #2973: Manual selection and extraction of elements in assemblies

Bar Optimiser

• Defect #3008: eluCad crash with Baroptimiser v1
• Defect #3035: No differentiation between different colours

Coordinate System

• Defect #2986: eluCAM coordinate system faulty

Core

• Defect #2852: Automatic Backup does not generate signature

DXF & DWG Import/Export

• Defect #2881: DXF-Export profil & fixtures faulty
• Defect #2964: DXF Import not available in the editing table
• Patch #2910: Contour import should refer to old import

Formulas & Variables

• Defect #2744: PL/H generates cycle

Free Millings (Editor)

• Defect #2650: Freemilling always has diameter 1
• Defect #2911: New freemilling editor does not start anymore
• Defect #2921: Contour partially invisible
• Defect #2955: Translations for new freemilling editor
• Defect #2958: eluCad crash after undo or redo
• Feature #2923: Calculate center point automatically when entering the end point
• Feature #2926: Dimensioning option for X and Y coordinates

Notching

• Defect #2270: Expanded notch: sawcut has no side
• Defect #2655: Clean cut has no function
• Defect #2734: Machining has wrong angle
• Defect #2737: eluCad freezes up when expanding a notch
• Defect #2745: Notches are expanded incorrectly in Elu coordinate system
• Defect #2816: Notch "Automatic" does not work
• Defect #2892: Notch with angle not complete
• Defect #2900: Orientation change is discarded after expanding the notch
• Defect #3032: Sawcuts with notching angle are expanded incorrectly in the Elu coordinate system

Pocket Milling & Cleaning

• Defect #2992: Handling of deleted or renamed tools in pocket milling settings
• Feature #2343: Store last used values for pocket milling dialog
• Feature #2729: Broaching for roughing and finishing
• Feature #2885: Extension of the input mask
• Patch #3000: Remove missing tools from the broach setting

Probing

• Defect #2326: Only the ID of the measurement correction is displayed in the table
• Defect #2889: Edge measurement calculated incorrect approach point for measurements outside the profile
• Defect #3064: Default values for measurement will be ignored

Settings

• Defect #2882: Option fixture & profile export returns wrong DXF name

Setup-Sheet & Reporting

• Defect #2671: Error message during creation
• Defect #2818: PDF Viewer could not open the setup sheet document
• Defect #2837: View and division or layout not correct
• Defect #2898: Creating a setup sheet no longer works
• Defect #2929: Unknown error during creation

User Interface

• Defect #2684: File extension ecw missing when saving as

eluCloud

• Feature #2947: Default configuration for Cloud Connector

3D Import

• Defect #2287: Crash during assembly import
• Feature #2346: Commandline 3D import

3D-Assistent

• Defect #2216: 3D Import Assistant localization
• Defect #2275: Crash on close of 3D import assistant
• Defect #2277: Cut angles exported as 0°
• Defect #2301: Crash during profile selection
• Defect #2302: Profile is misaligned
• Defect #2303: Crash when entering position for cut
• Defect #2304: Crash when selecting profile several times
• Defect #2310: Incorrect illustration of the cross section after automatic alignment
• Defect #2313: Crash on assembly import and right click on tree view
• Defect #2316: Error in 3D Import assistent
• Defect #2811: Error in Assembly Import
• Defect #2814: Subassembly Node Selection issue
• Defect #2851: Subassembly Node Selection issue
• Feature #2836: Automatic Closing of 3D Import Assistent
• Feature #2846: 3D Import Assistant: Improved ListView UI

DXF & DWG Import/Export

• Defect #2297: Incorrect conversion of contours

Free Millings (Editor)

• Defect #2240: Move to Origin fails for exotic geometric types
• Defect #2292: Performance issues
• Defect #2311: Crash when marking the works
• Defect #2312: Crash when clicking on Difference
• Defect #2323: Translations missing
• Defect #2324: Crash when using the Assistent
• Defect #2652: Crash during dimensioning
• Defect #2659: Catching points with broaching keyhole does not function correctly
• Defect #2698: Free side assignment lost via free milling editor
• Defect #2700: Polyline: Deletion of a subelement should be possible
• Defect #2786: Freeform assistent generates error in the new Freeform Editor
• Feature #2227: Dialog-based milling segment input
• Feature #2298: Optimize imported DXF

Installer & WebUpdate

• Defect #2079: Installer was in german but elucad started in english why?
• Defect #2197: Special characters allowed during installer
• Defect #2328: eluCad license shown in English
• Patch #2662: Update system requirements

Localization

• Feature #2276: Profile database localization

Notching

• Defect #2269: Notch variant in work table

Pocket Milling & Cleaning

• Defect #2268: Contour only broached to path middle
• Defect #2697: Broaching freeform editor
• Defect #2727: Distance to final contour
• Defect #2731: Islands are not milled correctly

Probing

• Defect #1116: Measure run visualization: Related runs
• Defect #1938: Error during measure run activation
• Defect #2244: Copying measure runs to job preparation
• Defect #2246: Crash when selecting multiple measure runs
• Defect #2290: Measure group creation removes existing assignments
• Feature #2247: Measure run assignment for multi-side macros
• Feature #2248: Measure run visualization: Individual measure runs and measure groups

Settings

• Defect #2078: Deselection of tools in notch settings has bugs
• Defect #2279: Wrong description for setting

Setup-Sheet & Reporting

• Defect #2334: Handle situation when cut images cannot be rendered
• Defect #2694: Unknown error when generating a setup sheet

User Interface

• Defect #1324: Deprecated settings used for opening DGX folder
• Defect #2266: eluCad crash when clicking cut/job
• Defect #2284: Cutting angles don't work

3D Import

• Defect #2213: Automatic assembly import
• Defect #2224: Cleanup of temp folders
• Defect #2226: 3D import issue with enabled assembly import

3D View

• Defect #2150: 3D view issues
• Defect #2211: Milling visualization issue
• Defect #2258: Missing faces in free milling visualization
• Defect #2259: Free milling visualization

3D-Assistent

• Defect #2210: Manual 3d import broken

Bar Optimiser

• Defect #1844: Jobs not merged

CAD Editor

• Defect #2252: Wrong contour after difference function

DXF & DWG Import/Export

• Defect #1368: Contour selection window doesn't support DWG
• Defect #1494: DXF profile cross section export for NCW Viewer

Free Millings (Editor)

• Defect #2127: Work diameter changed by free milling editor
• Defect #2139: Arc movement via G02/G03
• Defect #2167: Render issue for duplicate milling segments
• Defect #2183: Free milling editor doesn't open
• Defect #2188: Opening a contour modifies it
• Defect #2189: Localization issues for attributes
• Defect #2241: Crash of free milling editor
• Defect #2249: Free milling editor changes contour when opening it
• Defect #2250: Application crash via Difference function
• Defect #2255: Rounding errors in free milling editor
• Defect #2256: Contour changed after transfer from free milling editor to eluCad
• Defect #2262: Application crash during Extension function
• Feature #1582: Feed values from GCode to eluCad
• Feature #2162: Selecting a single segment in a polyline

Installer & WebUpdate

• Defect #1902: Uninstaller issue
• Defect #2156: Templates are not copied
• Patch #2214: Update CodeMeter Driver

Localization

• Defect #2182: Localization issue for 3d import settings

Machine Code Generation

• Defect #1687: Crash during NC-X execution

Notching

• Defect #1874: Notch variant longholes creates rectangles

Pocket Milling & Cleaning

• Defect #706: Transformation of segmented circles into arcs
• Defect #2184: Pocket milling contour wrong
• Defect #2185: Ambiguous tool selection for roughing/finishing
• Defect #2194: Tool selection requires restart
• Defect #2196: Group/Macro orientation ignored by pocket milling
• Defect #2254: Finishing contour overlaps final contour
• Defect #2261: Pocket milling direction is ignored

Probing

• Defect #1706: Drag & drop doesn't copy variables
• Defect #2017: Side orientation and measurement probes

Settings

• Defect #2128: Rendering issue for setting
• Patch #2228: Remove 'Page break after [Parts]' setting

Setup-Sheet & Reporting

• Defect #2081: Set decimal separator to "."
• Defect #2134: Preview setup-Sheet does not work
• Defect #2190: Setup sheet failed to generate
• Defect #2203: RenderCutImage throws exception
• Defect #2215: Missing localization in setup sheet template

Testrun

• Defect #2143: Test run looking for post processor files in wrong directory

User Interface

• Feature #443: Page breaks in setup sheet

3D Import

• Feature #1132: Assembly import

3D View

• Defect #894: 3D visualization of circle

3D-Assistent

• Defect #2116: Cutting plane for profile cross section not rendered correctly

Core

• Defect #1722: Warning about old license model
• Defect #2114: Application crash during NC-X execution
• Defect #2140: Application crash during NC-X execution

DXF & DWG Import/Export

• Defect #1971: Incorrect path segment optimization during DXF import

Free Millings (Editor)

• Defect #1638: Free milling editor performance
• Defect #2098: Empty drawing means empty ISO code
• Defect #2100: Free milling moved to origin by opening it
• Defect #2102: Trimming function doesn't work
• Defect #2109: Cancelling free milling editor still modifies free milling contour
• Feature #1621: Beveling function for polyline corners
• Feature #2099: Shortcut support
• Feature #2103: Beveling function for individual paths
• Feature #2104: Support work feeds
• Feature #2105: Input support for polyline segments
• Feature #2106: Difference function extended to support multiple contours
• Feature #2107: Add description to property grid
• Feature #2108: Add description for various operations

Installer & WebUpdate

• Defect #2083: Remove valid certificate check
• Defect #2095: Mapped drive's actual path may be inaccessible
• Defect #2111: Disable installing 4.1 to the same location as previous version
• Feature #2013: Machine setup for SBZ141

Localization

• Defect #2110: Missing localization

Notching

• Defect #2115: Application crash during notch expansion
• Defect #2118: Error message despite successful notch expansion
• Defect #2138: Cumulative expansion of notches for successive nc-x runs
• Feature #1995: Notch creator error messages
• Feature #2025: Correct errors in notch builder

Pocket Milling & Cleaning

• Defect #1796: Pocket milling produces no result
• Defect #1850: Wrong contour after pocket milling
• Defect #2087: Roughing contour damages island
• Defect #2094: Ignore inactive works during island insection
• Defect #2173: Wrong corner type
• Feature #678: Arc build for segmented arcs
• Feature #2093: Diameter and orientation support for pocket milling
• Patch #682: Only enter and leave profile when necessary

Probing

• Defect #2056: Interactive depth calculation doesn't work for measurement runs
• Defect #2057: Undo deletes measurement points
• Feature #1423: Export of correction formulas using deltas
• Feature #1945: Axis corrections not applied during notch expansion
• Feature #2090: Probing for free millings
• Feature #2091: Clamp editing support for probing
• Patch #1424: Placement for probing settings within settings page

Settings

• Defect #2112: Issue in localization file
• Defect #2117: Migration of 4.0 feature for multiple nc-x executions

Setup-Sheet & Reporting

• Defect #2082: Barcode is blurry
• Feature #2097: Setup sheet template selection via dropdown

DXF & DWG Import/Export

• Defect #1304: Filename usage when importing profiles from DXF/DWG

Free Millings (Editor)

• Defect #977: Key cylinder creation function in CAD editor
• Defect #1592: Cursors are missing for certain elements
• Defect #1991: Changes to start/end point have no effect
• Defect #1992: Contour import generates straight lines
• Defect #1993: Some functions delete the original drawing
• Defect #1994: Pan etc. symbols in ViewportLayout
• Defect #2020: Erroneous circle conversion
• Defect #2065: Translation in PropertyGrid doesn't work
• Feature #927: New free milling editor
• Feature #1833: Line generation from angle and length

Installer & WebUpdate

• Defect #2009: EluCad Uninstall
• Defect #2015: Migration of empty settings
• Defect #2062: No language support except English in uninstaller
• Defect #2067: log.config file missing after installing eluCad

NCX-Run, AV, PPs

• Feature #1906: DXF Export of profile and fixture

Notching

• Defect #1637: Missing depth table properties for post intrusion and safety distance
• Defect #2010: Free milling only generated on one side
• Defect #2027: Notch not expanded for clamp editing
• Defect #2072: Clamp editing with new notch builder
• Feature #1952: Notch expansion error messages
• Feature #2026: Default behavior for notch builder similar to eluCad 4.0

Pocket Milling & Cleaning

• Defect #1309: Two roughing contours required for rectangle
• Defect #1997: Pocket milling fails for overlapping contours
• Defect #2024: Contour error for outer contour line
• Defect #2028: Pocket Milling Localization
• Defect #2071: No logging output in PocketMilling
• Patch #709: Warning when tool depth step smaller than specified depth step

Probing

• Defect #1419: Export of correction formulas for free sides
• Defect #1450: Measure runs in normal groups
• Defect #1917: Edge measurements offset by clamp editing
• Defect #2008: Measure run offset by clamp editing
• Defect #2018: Cycle-free validation of measure runs/groups
• Defect #2038: Unable to correct measure group using measure run
• Defect #2053: Wrong calculation of starting position for edge measurements on free side planes
• Defect #2054: Incomplete copy-paste of measurement groups from one document to another
• Defect #2061: Unable to edit measure run
• Feature #826: Measure run / Measure group icon(s)
• Feature #862: Measure runs and measure groups in macros
• Feature #1030: Measurement runs in clamp editing
• Feature #1838: Axis corrected groups in clamp editing
• Feature #2069: Disallow corrections for measure groups

Settings

• Defect #1970: Properties menu disappeared

Time Study

• Defect #1347: Time study application crash

User Interface

• Defect #1601: Measure run assignment dropdown widgets not updated when changing sides
• Defect #2084: Permanent busy cursor from state protocol generation error

Free Millings (Editor)

• Defect #1975: Pan possibility for Viewport
• Defect #1984: Work position loss
• Defect #2014: Free milling path selection
• Feature #1412: Highlighting of contours migrated to ISO code
• Feature #1668: Update Icons

Installer & WebUpdate

• Defect #2012: Wrong updating eluCad with new version of the installer
• Feature #1152: Installer for eluCad 4.1
• Feature #1958: New Images for Installer
• Patch #1998: Set Icon of Uninstaller to new icon

Notching

• Defect #1748: Disable notch after expansion
• Defect #1880: Expanded notch works too low

Pocket Milling & Cleaning

• Defect #674: Pocket milling results have negative priority
• Defect #957: Pocket milling crash
• Defect #962: Pocket milling loses work position
• Defect #1961: Island support for pocket milling not working

Probing

• Defect #1916: Axis corrections lost after clamp editing

Setup-Sheet & Reporting

• Defect #1962: Process not stopped from pdf generation error
• Feature #1644: Barcode Generation
• Feature #1652: Support for setup sheet settings
• Feature #1653: Installer Task to copy default template(s) to user folder
• Patch #1648: Deployment of setup sheet default template
• Patch #1649: Remove HTML Setup Sheet feature and its setting

DXF & DWG Import/Export

• Defect #1960: Conversion issues for arcs

Data Format

• Defect #1800: Wrong options values for NCW output

Free Millings (Editor)

• Defect #1367: Application crash during G-Code generation
• Defect #1463: Picking Start and End of a Polyline
• Defect #1580: Undo/Redo for complex operations
• Defect #1581: Initial text spacing in EditControls wrong
• Defect #1583: ToolbarManager performance test
• Defect #1587: Enable Selection ComboBox and MenuItem
• Defect #1593: Missing translations in ViewportLayout
• Defect #1612: Prefer thick lines as default
• Defect #1651: ShowRuler, ShowGrid (no check sign)
• Defect #1654: Translations not working in elusoft.Geometry.Eyeshot
• Defect #1824: Duplicate free milling editor buttons in eluCad
• Defect #1830: New FreeMillingEditor doesn't work after installing
• Defect #1867: Undo/Redo for complex operations
• Defect #1881: Hide/show PropertyGrid using splitters, position is not saved
• Defect #1932: Bind Undo/Redo to StatusText
• Feature #928: Freeform drawing of shapes
• Feature #929: Freeform properties shown in editor
• Feature #931: Iso-Code Interpreter + Editor
• Feature #1098: Free milling editor plugin integration
• Feature #1289: free milling editor
• Feature #1569: Call to free milling editor
• Feature #1622: Automatic repetition of last used command
• Feature #1662: Hide/show PropertyGrid using splitters
• Feature #1663: Show/hide ruler from menu entry
• Feature #1664: Launch calculator fom free milling editor
• Feature #1665: Function "close path/close polyline"
• Feature #1667: Update SplashScreen style
• Feature #1670: Ability to use function keys/short-cuts in editor
• Feature #1671: Complete translation of free milling editor
• Feature #1832: Selection and Editing of vertices via mouse cursor
• Feature #1870: Label Operation.Name and Description
• Patch #1610: Parameter input next to cursor

Installer & WebUpdate

• Defect #1793: Update is not replacing template file
• Defect #1804: Wrong UserLocation on First Installation
• Defect #1885: Settings reading fails on some PC
• Patch #66: Update NC-X/PP/INI directory during web update

Localization

• Defect #1948: Loading of language files

Notching

• Defect #1636: Milling disk selection
• Defect #1797: Missing rotation from expanded notches
• Defect #1876: NC error for notch with side milling cutter
• Defect #1878: Expansion of notches doesn't consider cut rotation
• Defect #1944: Height- & LengthCorr for expanded notches
• Defect #1946: Original notches disabled after expansion
• Defect #1964: Incorrect expansion of notch with free milling
• Feature #1421: Maximum tool depth considered for notch expansion
• Feature #1476: Notch with sawcut and sidelong rectangles

Pocket Milling & Cleaning

• Patch #847: Log output for pocket milling

Probing

• Defect #863: Automatic removal of additional depth table values for surface measurements
• Defect #1589: Measure run ID generation
• Defect #1787: Update of already assigned measurement runs
• Patch #1798: Hiding axis correction

Setup-Sheet & Reporting

• Defect #1794: Delete empty tables
• Defect #1847: Chaotic setup sheet layout
• Defect #1860: Setupsheet generation cannot be called twice
• Defect #1875: No profile picture shown if no fixture defined
• Defect #1884: Add method for files in use check
• Defect #1963: Ambiguous error messages for certain setup sheet creation problems
• Feature #1656: Support for localized labels
• Feature #1807: Export of fixtures for cuts

User Interface

• Defect #1951: Application crash via Picking button
• Defect #1953: Application crash via interactive depth calculation